The Wilson 859957 signal splitter allows you to split the signal from an amplifier to up to 4 internal antennas(daisy-chained) with negligible signal loss. The splitter covers 700-2300MHz, and so will work with all the amplifiers on our site, as well as any future Wilson repeaters that might be built for new technologies.
This 2-way splitter allows you to drive two interior antennas from a single amplifier/repeater. Because you are splitting equally the signal each antenna will receive is 1/2 of the original signal. This equates to about 70% of the coverage distance when compared to driving a single antenna. You should use this splitter if the areas you wish to cover are approximately equal in area.
The splitter has N Female connectors. Typically a 2ft LMR400 cable is used to connect the splitter to the amplifier. Any cable length can be used, but the total cable length in the system should be kept to a minimum to minimize attenuation.
Lengths of coaxial cable can then connect the splitter to the internal antennas.